LE Even Spray

LE EVEN SPRAY TIP/RE RAINDROP

FOR BAND SPRAYING

This is an even flat spray nozzle tip that is used for pre-emergence and other kinds of band spraying. Its flat spray pattern is uniformly distributed across the entire band width.

* Recessed orifice minimizes chances for damage.
* Wrench flats provide for easy pattern alignment. Use with standard or DELA-FIT/QUICK CHANGE caps
and bodies.
* Available in brass, SS insert or SS in 800 and 400 spray angle.

Maximum Recommended Pressure
Brass and SS: 500 psig  (34.4 bars)
SS Insert: 100 psig (7 bars)

Maximum Recommended Temperature: 1200F (500C

BAND APPLICATION RATE

Follow the chemical manufacturer’s band width recommendations. In our band application charts, gallons per acre means volume applied to area actually sprayed and, depending on row spacing and width of band, this area is some fraction of the total field. This means that any nozzle will give a much higher volume per acre rate on area actually sprayed in a band than if the same nozzle (with same spacing) is used in a broadcast application.

  1. To calculate nozzle flow rate (gpm) for band application from our charts use this formula:

Example:  Assuming the broadcast rate is 25 gpa, speed is 10 mph, and band width is 7″, calculate from formula above the nozzle flow rate in the band:

2. To calculate the band application rate (gpa) for a known flow rate (gpm), use this formula:

Example: Assuming flow rate (gpm) is .295 gpm, band width is 7, nozzle spacing is 30″, and speed is 10 mph, calculate from formula above the band application rate (gpa)

Nozzle
Tip
Number

PART NUMBERS

BRASS

STAINLESS STEEL

THERMOPLASTIC

Bulk

Delapak

Bulk

Delapak

Bulk

Delapak

LE Even
Spray
Tip

 

  80-1E  31614-1  00073-882        
 80-1.5E  31614-4        51176-1  00073-1215
 80-2E  31614-7        
 80-3E  31614-10    31614-12  00073-895  51176-3  00073-1217
 80-4E  31614-13    00073-1218
 80-5E  31614-16    
 80-6E  31614-19  00073-888        
 80-8E  31614-22
 80-15E  31614-28  31614-30
 40-1E  31614-32      
 40-1.5E   00073-1044  31614-35  
 40-2E  00073-1061        
 40-3E    00073-1047        
 40-4E    00073-1050        
 40-5E  31614-43  00073-1057    
 25-1.5E      51175-1  00073-1210
 25-2E      51175-2  
 25-3E      51175-3  
 25-5E      51175-5  

LE & RE Capacity Chart

Nozzle Tip Number

Pressure
(psig)

Capacity
1-Nozzle
(GPIM)

 GALLONS PER ACRE (GPA)

1. Band Spraying-application rate on 14" band (any spacing)
2. Broadcast Spraying-actual treated field rate (40" spacing)

 3 MPH

4 MPH

5 MPH

7.5 MPH

10 MPH

ISO
Color

14"
Band

40"
Space

 14"
Band

 40"
Space

 14"
Band

  40"
Space

14"
Band

  40"
Space

 14"
Band

   40"
Space

 40-1E
80-1E

(100 mesh)

  20  .071  10.0  3.5  7.5  2.6  6.0  2.1  4.0  1.4  3.0  1.1
 30  .087  12.3 4.3  9.5  3.2  7.4  2.6  4.9  1.7  3.7  1.3
 40  .10  14.1 5.0  10.6  3.7  8.5  3.0  5.7  2.0  4.2  1.5
25-1.5E, 40-1.5E,
80-1.5E, 95-1.5E

(100 mesh)		  20  .11  15.6 5.4  11.7  4.1  9.3  3.3  6.2  2.2  4.7  1.6
 30  .13  18.4 6.4  13.8  4.8  11.0  3.9  7.4  2.6  5.5  1.9
 40  .15  21 7.4  15.9  5.6  12.7  4.5  8.5  3.0  6.4  2.2

 25-2E, 40-2E
80-2E, 95-2E

(50 mesh)

  20  .14  19.8 6.9  14.8  5.2  11.9  4.2  7.9  2.8  5.9  2.1
 30  .17  24 8.4  18.0  6.3  14.4  5.0  9.6  3.4  7.2  2.5
 40  .20  28 9.9  21  7.4  17.0  5.9  11.3  4.0  8.5  3.0
25-3E, 40-3E,
80-3E, 95-3E

(50 mesh)		  20  .21  30 10.4  22  7.8  17.8  6.2  11.9  4.2  8.9  3.1
 30  .26  37 12.9  28  9.7  22  7.7  14.7  5.1  11.0  3.9
 40  .30  42 14.8  32  11.1  25  8.9  17.0  5.9  12.7  4.5

25-4E, 40-4E
80-4E, 95-4E

(50 mesh) 

  20  .28  40 13.9  30  10.4  24  8.3  15.8  5.5  11.9  4.2
 30  .35  49 17.3  37  13.0  30  10.4  19.8  6.9  14.8  5.2
 40  .40  57 19.8  42  14.8  34  11.9  23  7.9  17.0  5.9
25-5E, 40-5E
80-5E, 95-5E

(50 mesh)		  20  .35  49 17.3  37  13.0  30  10.4  19.8  6.9  14.8  5.2
 30  .43  61 21  46  16.0  36  12.8  24  8.5  18.2  6.4
 40  .50  71 25  53  18.6  42  14.8  28  9.9  21  7.4

25-6E, 40-6E
80-6E, 95-6E

(50 mesh) 

  20  .42  59 21  45  15.6  36  12.5  24  8.3  17.8  6.2
 30  .52  74 26  55  19.3  44  15.4  29  10.3  22  7.7
 40  .60  85 30  64  22  51  17.8  34  11.9  25  8.9

25-8E, 40-8E
80-8E, 95-8E

(50 mesh) 

  20  .57  81 28  60  21  48  16.9  32  11.3  24  8.5
 30  .69  98 34  73  26  59  20  39  13.7  29  10.2
 40  .80  113 40  85  30  68  24  45  15.8  34  11.9
25-10E, 40-10E
80-10E, 95-10E

(50 mesh)		  20  .71  100 35  75  26  60  21  40  14.1  30  10.5
 30  .87  123 43  92  32  75  26  49  17.2  37  12.9
 40  1.00  141 49  106  37  85  30  57  19.8  42  14.8

 25-15E, 40-15E
80-15E, 95-15E

(50 mesh) 

  20  1.1  156 54  117  41  93  33  62  22  47  16.3
 30  1.3  184 64  138  48  110  39  74  26  55  19.3
 40  1.5  212 74  159  56  127  45  85  30  64  22